Thursday, March 31, 2011

How To Tweak Your Windows Startup Procedure!!!

Tweak is a utility that is available on the operating system or software tweaks are useful, other tweaks to optimize computer performance. Often you are upset with the performance of your computer is slower then the usual tweaks called tweaking your computer's performance will be faster but it also depends on the hardware you use.

If the hardware you are using a small capacity even though you've done tweaking then it will be minimal. If the hardware you are using a large capacity, the result of tweaking will be maximal.

Speeding up your booting process will reduce the waiting time you can use the computer.Here are some procedures you can perform that will help speed up your PC startup.Be sure to backup your hard drive in case you should make an error.Take your time and perform these tasks at your own risk.

There are procedures you can perform that will speed up the operating system boot-up.When tweaking your startup process,take care not to allow your computer to boot up too fast.Too fast booting will cause your PC to miss valuable data and not check all peripherals it needs to allow the computer to run at its best.


1.Use Scandisk and Defragment on your hard drive if you are not performing these two maintenance steps regularly.Over time,your files become scattered all over your hard drive.This causes the computer to hunt for every piece of file fragments throughout the drive.

2.Clean Up Your Registry.The installing and uninstalling of applications cause your registry to have many files it does not use. Your system slows down at startup because these files are loaded into memory every time the PC is started.Registry Healer which is a trial ultility will scan your registry for problems.

3.Edit Your SysEdit Configuration by Clicking on Start,Run,and then type "sysedit" in the open block. You will be presented with your system files.Check and remove any files you know are not needed.You can type "REM" at the start of a line to disable it to see if your computer has need for it.

4.Remove unwanted programs that may be starting up in your Startup Folder.This folder as well as your Sysedit file may have programs slowing the PC down. Click on Start,Settings,Taskbar and Start Menu Tab, Start Menu Programs,Remove,and go down to the Startup Folder.There you can expand and remove any unwanted programs.

5.Go to Start,Run,type "msconfig" in the open box and press enter.Click on Startup and here you can remove programs here as well.The thing to remember is to take notes of any program you remove just in case you find that program useful after all.Be sure to take the time and backup your system files so that you can restore these files should something go wrong.Take notes of files you remove from Sysedit or msconfig.

6.Enable your Quick Boot option in your BIOS.Access your Bios and locate this feature that bypasses some of the checks your computer makes at POST.The downside to enabling this feature is that it increases the chances of a hardware failure going undetected.You may want to use this feature from time to time and see if the difference in bootup speed is worth it.

0 komentar :

:10 :11 :12 :13 :14 :15 :16 :17
:18 :19 :20 :21 :22 :23 :24 :25
:26 :27 :28 :29 :30 :31 :32 :33
:34 :35 :36 :37 :38 :39

Post a Comment